Arrangements of proteins at reconstituted synaptic vesicle fusion sites depend on membrane separation

Synaptic vesicle proteins, including N‐ethylmaleimide‐sensitive factor attachment protein receptors (SNAREs), Synaptotagmin‐1 and Complexin, are responsible for controlling the synchronised fusion of synaptic vesicles with the presynaptic plasma membrane in response to elevated cytosolic calcium levels. A range of structures of SNAREs and their regulatory proteins have been elucidated, but the exact organisation of these proteins at synaptic junction membranes remains elusive. Here, we have used cryoelectron tomography to investigate the arrangement of synaptic proteins in an in vitro reconstituted fusion system. We found that the separation between vesicle and target membranes strongly correlates with the organisation of protein complexes at junctions. At larger membrane separations, protein complexes assume a ‘clustered’ distribution at the docking site, inducing a protrusion in the target membrane. As the membrane separation decreases, protein complexes become displaced radially outwards and assume a ‘ring‐like’ arrangement. Our findings indicate that docked vesicles can possess a wide range of protein complex numbers and be heterogeneous in their protein arrangements.

Synaptic vesicle proteins, including N-ethylmaleimide-sensitive factor attachment protein receptors (SNAREs), Synaptotagmin-1 and Complexin, are responsible for controlling the synchronised fusion of synaptic vesicles with the presynaptic plasma membrane in response to elevated cytosolic calcium levels. A range of structures of SNAREs and their regulatory proteins have been elucidated, but the exact organisation of these proteins at synaptic junction membranes remains elusive. Here, we have used cryoelectron tomography to investigate the arrangement of synaptic proteins in an in vitro reconstituted fusion system. We found that the separation between vesicle and target membranes strongly correlates with the organisation of protein complexes at junctions. At larger membrane separations, protein complexes assume a 'clustered' distribution at the docking site, inducing a protrusion in the target membrane. As the membrane separation decreases, protein complexes become displaced radially outwards and assume a 'ring-like' arrangement. Our findings indicate that docked vesicles can possess a wide range of protein complex numbers and be heterogeneous in their protein arrangements.
Keywords: cryoelectron tomography; fusion; in vitro reconstitution; membrane; SNARE; synaptic vesicle Vesicle fusion occurs when the membrane of a vesicle merges with the membrane of an organelle or plasma membrane. In doing so, fusion allows the contents of vesicles and lipids to be transferred between intracellular and extracellular compartments [1]. In neurons, docked and primed synaptic vesicles are ready to fuse with the presynaptic membrane. Fusion occurs rapidly and in a synchronised manner in response to locally elevated calcium levels, releasing neurotransmitters into the synaptic cleft [2]. Fusion is enabled by Nethylmaleimide-sensitive factor attachment protein receptors (SNAREs). T-SNAREs composed of syntaxin 1A and SNAP-25 on the plasma membrane interact and fold with the v-SNARE VAMP2/synaptobrevin on synaptic vesicles [3]. Folding occurs in a zipper-like fashion beginning at the N termini of SNAREs and proceeding towards their C termini, reducing the distance between the apposing lipid bilayers and resulting in the formation of a four-helical bundle trans-SNARE complex (SNAREpin) [4,5]. The cytoplasmic region of each SNARE protein contains a 'SNARE' motif consisting of 15 conserved hydrophobic layers (positions À7 to À1 and +1 to +8) and an ionic layer at position 0. Once folded, these layers form the largely hydrophobic core of the trans-SNARE complex [6,7]. The helical folding extends to the pretransmembrane linker and releases sufficient energy to overcome the energetic barrier separating the vesicle and plasma membrane, thereby allowing it to drive fusion [4,8,9,10].
Numerous regulatory factors assist in promoting formation of the trans-SNARE complex and later in precisely coordinating its response to calcium influx. Briefly, initial vesicle tethering is likely mediated by the interaction of Rab3 on synaptic vesicles with Rim1 at the active zone of the plasma membrane [11]. Subsequent priming reactions involving Munc13-1 and Munc18-1 control the N-terminal assembly of the trans-SNARE complex [12][13][14][15][16][17][18][19][20][21]. Ca 2+ regulation requires Synaptotagmin 1 (Syt1) and Complexin (Cpx) [22][23][24][25][26][27]. Syt1 is an integral membrane protein present alongside VAMP2 in synaptic vesicles, and it possesses two cytoplasmic C2 domains that bind Ca 2+ [9,22]. In addition to Ca 2+ binding, Syt1 uses its N-terminal C2B domain to bind phosphatidylinositol-4,5-bisphosphate (PIP 2 ) on the plasma membrane. Syt1-PIP 2 and Syt1-t-SNARE binding contribute to the docking of vesicles to plasma membranes [28,29]. The small cytosolic protein Cpx helps to coordinate proper trans-SNARE zippering through a series of interactions with the forming trans-SNARE complex [30][31][32]. While Cpx has a prominent stimulatory function in Ca 2+ -dependent neurotransmitter release, Cpx also acts to inhibit the complete folding of the trans-SNARE through binding to the membrane proximal regions of SNAP-25 and VAMP2 [33,34]. Such binding blocks the C-terminal folding of the trans-SNARE complex, holding it in a partially folded clamped-like state, preventing membrane fusion. Syt1 also contributes to the inhibitory clamp through interactions between its C2B domain, the trans-SNARE and Cpx [35]. In this way, the synaptic vesicle is trapped in a docked and primed state on the plasma membrane [35]. Through a poorly understood mechanism, during Ca 2+ influx the C2 domains of Syt1 bind Ca 2+ and anionic lipids causing conformational changes that allow the complete folding/zippering of the trans-SNARE complex to bring the two membranes into close proximity and subsequently drive their fusion [35][36][37][38].
Despite the biochemistry of synaptic proteins being well understood, their organisation at fusion junctions has proven more difficult to decipher. Several structural studies have tried to address this. Crystal structures have revealed two possible Syt1 binding sites on either side of prefusion SNARE-Cpx complexes [39,40] and cryoelectron microscopy (cryo-EM) studies have shown that Syt1 oligomerises into rings when added to monolayers [41]. These observations led to the proposal of a 'buttress ring' model for synaptic protein organisation in which SNAREpins are bound to the plasma membranes via a Syt1 oligomeric ring, and are simultaneously flanked by Syt1 monomers on their vesicle-facing side [35,42,43]. Furthermore, a recent cellular cryoelectron tomography (cryo-ET) study suggested a sixfold symmetrical arrangement of synaptic protein complexes in this primed prefusion vesicle state [44].
Other insights into fusion protein organisation and function have been obtained using synaptic proteins reconstituted into liposomes or other membranes. These systems can be used for quantitative studies of fusion kinetics as well as for structural studies by cryo-ET. For example, one study suggested that smaller 'point' contacts representing lower numbers of protein complexes are preferential for membrane fusion and that higher order assemblies of complexes are delirious to fusion [45]. On the other hand, a separate cryo-EM study indicated that the partial folding of trans-SNAREs forces opposing membranes tightly together prior to fusion [46]. Both of these studies were limited in that both t-SNARE and v-SNARE proteins were reconstituted into small unilamellar vesicles (SUVs). SUVs reconstituted with the t-SNARE exhibit high membrane curvatures that do not accurately mimic the relatively flat surface of the plasma membrane. This higher membrane curvature may limit the ability of fusion junction proteins to properly organise. Here, we use cryo-ET to address fusion protein organisation by analysing an in vitro reconstituted system [47] where VAMP2 and Syt1 were reconstituted into SUVs, while preformed t-SNARE complexes of syntaxin 1A and SNAP-25 were reconstituted into giant unilamellar vesicles (GUVs). The large size and lower membrane curvature of the GUVs were designed to mimic the relatively flat surface of the plasma membrane, while SUVs ranging from roughly 20-150 nm diameter mimicked synaptic vesicles. This system has been previously used in cryo-ET studies to investigate membrane morphologies at fusion junctions [48]. Here, taking advantage of improved cryo-EM methods, we were able to analyse the distribution of protein densities at vesicle docking sites in more detail and distinguish three types of protein density organisation classes at vesicle docking sites. We found that the membrane morphology, protein arrangement and the distance between SUV and GUV membranes are intimately linked. Furthermore, we found that fusion sites have highly heterogeneous protein arrangements and numbers.

Cryo-EM sample preparation
SUV/GUV mixtures were incubated on ice, and the WT and d-84 samples were incubated for 15 min, while the d-84 + Munc18 sample was incubated for 1 h. Following incubation on ice, samples underwent a 1 min 37°C warm-up. Ten nanometre gold fiducials were then added to samples. Three microlitre of each sample was applied to glow-discharged lacey 200 mesh carbon grids (Plano GmbH, Wetzlar, Germany) before being manually back side blotted in a high humidity chamber (EMBL, Heidelberg, Germany) using Whatman 1 filter paper that had been previously soaked in 50 mM EDTA and then dried.
Following blotting, grids were plunged and frozen in liquid ethane.

Cryo-ET data acquisition
Tomograms were collected on a Titan Krios electron microscope (Thermo Fisher, Waltham, MA, USA) operated at 300 kV using a Volta phase plate and a K2 Summit direct electron detector (Gatan, Pleasanton, CA, USA). Tilt series images were acquired using SerialEM software [51] at 0 lm defocus, 81 0009 magnification, 70 lm objective aperture, 50 lm C2 aperture, energy filter slit width of 20 eV and pixel sizes ranging from 4.35 to 5.31 A/pixel. Dose-symmetric tilt series [52] with a 1°step were collected over +/À 60 degrees. The total electron dose was~200 e -/ A 2 . See Table 1 for a summary of data collection parameters.

Image analysis
Owing to a large difference in size, most GUVs and SUVs were easily distinguishable. Docking sites were defined as those where SUVs were found within 50 nm of GUVs, and where visible protein density was found between the SUV and GUV membranes. A small number of sites were excluded from further analysis because there was no obvious size difference between contacting vesicles or because overlapping features prevented clear interpretation. At SUV-GUV docking sites, landmark points were placed at the centres of SUVs and at a position midway between SUV and GUV membranes at their point of closest approach. Individual subtomograms of junctions were extracted as 150 nm boxes, centred on the second landmark point. The subtomograms were rotated to place the vector between the two landmark points on the z-axis. Additional landmark points were then placed at the centres of all protein densities observed on the SUV membrane, GUV membrane and in the intermembrane space. These landmark points were used to quantify the number of protein densities. Due to the limited signal-to-noise ratio in cryoelectron tomograms, and the application of image filters, observed density may correspond to a single protein or to more than one protein if they are too close together to be separately resolved. Small or extended proteins may not give rise to a visible density. The number of protein densities is therefore lower than the number of proteins. The number of protein densities will, however, correlate with the number of proteins, thereby allowing comparison between states and stages can be made. A landmark point was added on the SUVs outer membrane leaflet, at the point of closest approach to the GUV membrane, and the distance from this point to the GUV membrane was then measured using the Amira distance measuring tool. Junction morphologies were visually assessed and categorised as either 'Clustered' (0), 'Intermediate' (0.5) or 'Ring-like' (1) based on the distribution of landmark protein density points at junctions. The presence or absence of GUV membrane protrusions at each junction was visually assessed and categorised as (1) and (0), respectively.
Pearson correlation coefficients (CCs) were then calculated between the measured parameters: junction morphology, distance between GUV-SUV outer membrane leaflets, GUV membrane protrusions and the total number of protein densities at junctions. Regression analysis was performed to test the significance of any observed correlations. We classified significant CCs with magnitudes between 0.1 and 0.3 as 'small', between 0.3 and 0.5 as 'moderate' and above 0.5 as 'strong' [55].

Averaging of junction morphology classes
To assess relationships between junction morphology, membrane separation and GUV protrusions, subtomograms of each junction type from the WT condition were  The data set as a resource The tomograms we have generated can act as a data resource against which other models can be compared, or from which models can be derived. We have therefore deposited the reconstructed tomograms, as well as the landmark points which mark the position and orientations or docking sites, at the EMPIAR database (accession number EMPIAR-10498).

Morphology of docked, primed vesicles in a reconstituted system
CpxII was mixed with GUVs containing syntaxin 1A and SNAP-25 (reconstituted as a preassembled complex) in calcium-free solutions. SUVs containing Syt1 and VAMP2 were mixed with CpxII-GUV solutions and incubated on ice before undergoing a 1 min 37°C warm-up. In an attempt to improve sample homogeneity, and therefore interpretability, by generating more uniformly zippered trans-SNARE complexes, in some samples VAMP2 was replaced with a fusion-incompetent deletion mutant, VAMP2 d-84. VAMP2 d-84 lacks L84 at the +8 position of the SNARE motif and locks trans-SNARE zippering near the membrane proximal C-terminal end of the SNARE motifs [46]. In addition, Munc18-1 was added to one reaction mix to increase the total protein density at docking sites in an attempt to further improve interpretabilitythis condition was incubated for an extended  Fig. 2A,B. SUVs were spherical and on average 80 nm in diameter but had a size range of 20-150 nm.
A small number of t-SNARE complexes could be seen protruding from the external and the internal surfaces of GUVs at sites where no docked SUVs were present. V-SNARE and/or Syt1 were sometimes seen protruding from the internal and external surfaces of undocked SUVs. Protein densities at sites of docking were clearly seen both on SUV and GUV membranes and on some occasions in the space between SUV and GUV membranes Fig. 2A,B. Some docked SUVs appeared to be at larger distances from GUV membranes, while others appeared to be physically touching the GUV membrane. Where SUVs appeared docked, GUV membrane protrusions were sometimes seen (Fig. 2, yellow arrowheads). At larger membrane separations, there appeared to be a greater occurrence of GUV membrane protrusions. There were no obvious morphological differences between the three conditions. At docking sites, t-SNARE complexes appeared to cluster not only on the outer membrane leaflet, but also on the GUV inner membrane leaflet Fig. 2C, blue arrowheads). The inner membrane t-SNARE clustering is independent of the presence of membrane protrusions or regions of higher membrane curvature. We propose that it results from antiparallel interactions between the transmembrane domains of t-SNAREs that face outwards from the membrane, and t-SNAREs that are incorporated into the membrane with the opposite orientation (facing inwards from the membrane) [56].
To facilitate further analysis of docking sites, we extracted and oriented docked SUV sites as subtomograms and inspected them using Amira (Materials and methods). We assessed the distribution of protein densities in relation to the point of closest approach between the SUV and GUV membranes. We observed three types of protein density organisation: 'clustered junctions' where protein densities were clustered at the point of closest approach between the GUV and SUV membranes and showed little organisation; 'ring-like junctions' where all protein densities have been excluded from between the SUV-GUV membranes and are arranged in a ring-like fashion about the base of the SUV, leaving a region directly beneath the base of the SUV where no protein densities are observed; and 'intermediate junctions' where some but not all densities appeared to have become excluded from between the SUV and GUV membranes and have moved radially outward, while some densities are still observed beneath the SUV base Fig. 3 and Video S1. There appeared to be a correlation between membrane separation and the type of protein organisation seen: larger membrane separations correspond with clustered junctions, while junctions with smaller membrane separations seemed to be intermediate or ring-like junctions. This was observed across all conditions. All junctions where SUV and GUV membranes directly contacted one another were ring-like. Overall, no obvious morphological differences were observed between the three conditions.

Quantitative characterisation of docking sites
Our visual inspection of junctions suggested that there is a relationship between the distribution of protein densities and the separation between GUV and SUV membranes. To characterise this further, we measured the separation between outer leaflets of GUV and SUV membranes Fig. 4A (Materials and methods). At the majority of docking sites across all conditions, the membranes are separated by less than 10 nm (WT: 130 from 153, 85%, d-84: 78 from 88, 89%; d-84 + Munc-18: 123 from 133, 92%) and only two junctions were identified with separations greater than 20 nm. Halfzippered SNAREpins have been estimated to bridge a membrane separation of~10 nm [57] our data therefore suggest that most SNAREpins are at least zippered to the central 0-layer of the SNARE motif.
We next analysed further the link between membrane separation and protein density distribution. We found clustered junctions at membrane separations of 5-26 nm, intermediate junctions at membrane separations of 3-8 nm and ring-like junctions at membrane separations of 0-7 nm. In over 40% of ring-like junctions, the GUV and SUV membranes were in direct contact, and in many cases, the contact involved large areas of membrane (contact diameters: WT 16 AE 8 nm, n = 51; d-84 = 18 AE 12 nm, n = 41; d-84 + Munc-18 = 18 AE 10 nm, n = 34) Fig. 4B.
The distribution of membrane separations for different junction types was fairly consistent across all conditions Fig. 4A. Membrane separations > 8 nm, which are clustered junctions, were slightly more frequent in the WT condition than in the d-84 conditions Fig. 4A but this may reflect experimental variation. To quantitatively assess the relationship between junction morphology and membrane separation, Pearson CCs were calculated across all conditions. CCs were strong (between À0.76 and À0.86) and statistically significant (ttest P values < 0.05) confirming the link between junction type and membrane separation Fig. 5.
To better understand the protein distributions and membrane separations at different junction types, we aligned and averaged all subtomograms from the WT condition belonging to each junction type (Materials and methods). We additionally marked the coordinates of clearly visible protein densities within each subtomogram and displayed all coordinates from the subvolumes in each average Fig. 6, Video S2. The resulting averages reveal that from clustered to ringlike junctions, there is a decrease in membrane separation and a redistribution of protein densities outwards away from the contact. The averaged clustered structure shows a protrusion in the GUV membrane that is absent in the averages of other junction types.
We considered the possibility that blotting of the sample during EM sample preparation might generate forces that pull tethered SUVs away from the GUV surface, and in so doing generate GUV protrusions. However, we observed that sites with protrusions can Ring-like synaptotagmin oligomers have been proposed to play a role in regulating priming and fusion [58]. We therefore further analysed the protein distributions in ring-like junctions. Ring-like junctions are Protein densities could be seen attached to GUV and SUV outer membranes, and between SUV and GUV membranes. Protein electron densities between the membranes may be anchored to membranes outside of the slice shown. Some densities do not appear to be anchored to membranes, suggesting they are connected via disordered protein chain which are not visible in the tomograms. Scale bars = 10 nm. Video S1 contains a 3D visualization of these volumes. while others showed only a small number of discrete protein densities spread out around the junction. Protein densities were found at different distances away from the point at which the base of the SUV was closest to the GUV. The distances of protein densities differed even within a docking site, meaning that in many cases, complete or partial protein rings were not perfectly circular Fig. S1. There was no obvious difference in the appearances of ring-like junctions across the three conditions. When the SUV and GUV membranes were separated by < 3 nm, we only observed ring-like junctions, while at membrane separations between 3 and 8 nm, we also observed intermediate junctions. Based on structural models, SNAREpin-CpxII complexes have a diameter of 2.5-3 nm across [59] (PDB 3rk3), while SNAREpin-CpxII-Syt1-Syt1 complexes have a diameter of~8 nm when measured across each SNAREpin-flanking Syt1 C2B domain [39] (PDB 5cci). At membrane separations less than 8 nm, larger SNAREpin-CpxII-Syt1-Syt1 complexes would therefore be excluded from the intermembrane space, while at separations < 3 nm, smaller complexes such as SNAREpin-CpxII would also be excluded. Based on these observations, we propose that protein densities are excluded from between the SUV and GUV membranes when their membranes are brought close enough together, that this exclusion is largely determined by steric effects, and that exclusion generates the heterogeneous ring-like morphologies we observe. The site-specific arrest of SNAREpin zippering by the VAMP2 + 8 layer deletion mutant did not improve this heterogeneous morphology. Nevertheless, the addition of Ca 2+ to this kind of reconstituted system causes nearly all docked SUVs containing wild-type VAMP2 and Syt1 to fuse with t-SNARE containing GUVs [47]. Thus, it is likely that the heterogeneous range of different ring-like arrangements of protein densities that we observed are all capable of supporting vesicle fusion.

Analysis of protein complex numbers at fusion sites
For each junction morphology, we analysed the number of electron densities that we attributed to protein complexes. Protein electron densities were assigned by identifying electron densities that were protruding from the surfaces of SUV and GUV membranes, or that were present in the space between GUV and SUV  membranes. It should be noted that the precise number of protein densities counted will depend on the filtering applied to tomograms, and does not directly correspond to the number of proteins; however, the number of protein densities can be compared between docking sites (Materials and methods). The number of protein densities at clustered, intermediate and ringlike junctions is highly variable, ranging from 2 to 34 protein densities per site Fig. S2. These observations suggest that docking and bringing the SUV and GUV membranes into very close proximity can be achieved using highly variable numbers of proteins. The d-84 + Munc18 condition had a higher number of total protein densities compared to other conditions. The mean number of protein densities for the d-84 + Munc18 condition was 14.6 AE 6.9, n = 133, while for the d-84 condition, the mean was 10.1 AE 5.5, n = 90, and for the WT condition, the mean was 9.6 AE 4.4, n = 155. The larger number of protein densities observed presumably reflects the addition of Munc-18 contributing densities to the docking site.

Discussion
The organisation of protein complexes at fusion junctions in the primed prefusion state has remained controversial. Here, we have used a reconstituted system designed to mimic synaptic vesicle fusion that allows vesicles to be captured in their primed prefusion state. The membrane separations we observed are in the range of those seen in cryo-ET studies of vitrified synapses, which found synaptic vesicles tethered to plasma membranes at distances ranging from 0 to 40 nm [60]. We observed that where vesicles are docked at larger distances from the target membrane, protein complexes cluster locally between the two membranes, and a protrusion is often seen in the target membrane. It has been suggested that formation of a local membrane protrusion may reduce the kinetic barrier to fusion immediately prior to hemifusion [61]. We previously observed that the formation of protrusions during reconstitution of docking and priming is dependent on the presence of VAMP2 [48]. Most likely, interactions of Syt1 with the GUV membrane and the assembling trans-SNARE complexes lead to an accumulation of membrane-deforming proteins at the fusion site which would promote protrusion formation. In addition, the transmembrane domain of syntaxin 1A and the C2B domain of Syt1 both bind to PIP 2 , and local-lipid clustering may further contribute to protrusion formation [62,63]. In the current study, we have sufficient data quality to assess the presence of protein densities and find that protrusions are formed when proteins are clustered at the docking site, which occurs at larger (typically > 5 nm) membrane separations.
The majority of clustered docking sites are found with membrane separations between 5 and 15 nm; however, several junctions were also found at distances between 15 and 26 nm. If VAMP2 is folded to its zero layer when bound to a partially assembled t-SNARE and the unfolded regions are extended chains with an average length of 0.365 nm per amino acid, then the partially folded SNAREpin could bridge a membrane separation of~25-26 nm [39]. This is consistent with the longest GUV-SUV membrane separations observed here of 27 nm (in the d-84 sample) Fig. 4A. However, due to the small persistence length of a polypeptide, it is unlikely that the partially zippered SNARE complex covers this maximum distance. The small number of very long distance contacts may represent Syt1-PIP 2 /t-SNARE interactions in the absence of SNAREpin formation or a minor fraction of misaligned trans-SNARE complexes.
Half-zippered SNAREpins have been estimated to bridge a membrane separation of~10 nm [57]. In our in vitro system, the majority of docked sites are therefore likely to have SNAREpins zippered at least to the 0-layer. As the membranes of the vesicle and target membrane get closer together, it is possible that further zippering has occurred, with a membrane separation between 3 and 8 nm. At this separation, protein complexes are partially excluded from between the vesicle and target membrane, and move radially outwards. This reduces the local clustering of protein densities on the GUV membrane, and protrusions are no longer seen Fig. 3C. We speculate that the protrusions observed in clustered junctions may represent an intermediate on the way to the completely primed SNAREpin.
When membranes are within 3 nm of one another, all protein complexes are excluded from the region of close approach between the membranes and are found in a ring-like arrangement around the contact site. Ordered oligomeric rings formed by the C2B domains of Syt1 molecules varying in diameter from 18 to 43 nm (average diameter of 28 nm) have been observed in recent in vitro structural studies [41,58]. The C2B domains partially insert into phospholipid membranes and interact with t-SNARE helices via the so-called primary interface [35,39]. In addition, the C2B domains of other Syt1 molecules interact with the opposite side of the SNAREpin via a tripartite interface also containing CpxI [40]. In the absence of Ca 2+ , these oligomeric, ring-like Syt1 structures would constrain the SNAREs from zippering and fusion pore opening [35]. The protein rings that we observed near the GUV membrane in ring-like junctions varied considerably in their completeness, diameter and appearance Fig. S1. The rings may result from simple steric exclusion of fusion protein complexes from the contact site due to membrane proximity, or their formation may induce increased membrane proximity. We note that these two possibilities are not exclusive and a mixed model is possible. While our data do not allow us to determine the composition of the rings or the mechanism by which they form, seen in the context of existing literature we are tempted to speculate that they represent Syt1 rings that are less regular and more incomplete than those observed in simpler in vitro systems. Further experiments to disrupt Syt1 oligomerisation [58], [44], [64], or to obtain higher spatial resolution will be required to resolve the molecular organisation of the ring-like arrangements.
The number of protein complexes at fusion junctions has also been a subject of intense debate. Recent cryo-ET studies of vitrified synapses suggested a possible sixfold symmetrical arrangement of fusion protein complexes at primed junctions [44]. Another recent study using a reconstituted SUV system observed a variable number of protein complexes at sites of docking, while finding that sites of point-contact contain smaller numbers of protein complexes (six or fewer) [45] to enable fast millisecond rates of fusion, consistent with coarse grain models [65]. Larger ring-like contacts such as those seen in our data were not observed [45], perhaps reflecting the use of SUV rather than flatter GUV target membranes in the reconstitution. In our in vitro reconstitution, we also observed highly variable numbers of protein densities at primed prefusion junctions, and highly heterogeneous morphologies at fusion sites. In this reconstituted system, nearly all primed prefusion SUVs fuse upon calcium addition [47]. This leads us to conclude that docking and priming can be achieved with heterogeneous protein arrangements and stoichiometry and that the organisation of protein complexes at fusion junctions correlates with membrane proximity. Moreover, fusion junctions seem to have evolved great plasticity in their ability to not only dock vesicles but also fuse them with very low and very large numbers of protein complexes. This plasticity may make the system more robust. Nevertheless, in vivo, in particular at the neuronal synapse, with synaptic vesicles of defined diameters and very fast exocytosis, other regulators including Munc13 likely coordinate with Munc-18 and Syt1 to more precisely define the copy number and arrangement of SNARE protein assemblies.

Supporting information
Additional supporting information may be found online in the Supporting Information section at the end of the article. Fig. S1. Slices from subtomograms depicting junctions from the ring-like protein distribution class.