The FEBS Journal Author Guidelines
Download a brief (2-page) version of our author instructions here.
- Initial submission
- Submission of a revised manuscript
- Editorial policy
- Evaluation of manuscripts
- Ethical Standards
- Regular paper
- State-of-the-Art Reviews
- Discovery-in-Context Reviews
- Structural Snapshots
- Papers with three-dimensional models of proteins
- Structural data
- Sequence and proteomics data
- Transcriptomic and functional genomics data
- Enzyme activity data
- Hyperlinking to databases
- Data Sharing
- Title page
- Materials and Methods or Experimental Procedures
- Author Contributions
- Nomenclature, abbreviations, units and symbols
- Figure legends
- Supplementary material
- Preparation of electronic artwork for publication
- Cover illustrations
- Graphical abstracts
- LaTex article submission
- LaTex bibliography
- English language editing before submission
- Accepted Articles Published Online
- Embargo Period
- Copyright and OnlineOpen
- NIH-funded authors and The FEBS Journal
- Publication date
- Online production tracking
- Author material archive policy
Online submission of manuscripts is via https://mc.manuscriptcentral.com/febsj/
Step-by-step instructions on how to submit your manuscript are available online during the submission process, which does not need to be completed in one session. Any queries can be sent to the Editorial Office (email@example.com).
At initial submission, we recommend that authors submit their text, figures and tables as a single PDF file. Alternatively, the following files will be automatically converted into a single PDF:
- The manuscript (including title page, abstract, main text, references and tables) saved as a PDF, .doc or .rtf file. Tables should be included after the references.
- Figures can either be included in the main text file for reviewing purposes, or be provided as separate files (see Preparation of electronic artwork for publication for details of recommended file formats). All figures must be given a figure number.
- Supplementary material (e.g. large datasets or raw data supporting an existing figure; see Supplementary material).
NB Any unpublished papers that are cited must be uploaded as Supporting Documents for referees to access. An electronic copy of any related paper under consideration or in press elsewhere must also be submitted as a Supporting Document; failure to do so may delay the review process.
The following information must be provided during the submission stage:
- Names, institutions and email addresses of all the co-authors.
- The names and email addresses of four recommended referees, together with their institutions. Please do not suggest anyone whom you have collaborated or published with in the last 3 years, or scientists based at your own institution, as they will not be approached. Authors are encouraged to suggest a Member of the Editorial Advisory Board as a preferred referee, if appropriate.
- Evidence of database submission (see Structural data, Sequence and proteomics data and Transcriptomic and functional genomics data).
- Approval of citation of any personal communications.
- If the manuscript is a resubmission, please upload a letter containing point-by-point responses to the referees.
On successful submission, you will receive onscreen acknowledgement with a manuscript reference number. All authors will receive an email acknowledgement.
Please follow the instructions provided in the editorial decision letter. You will need to:
- Respond to the referees' comments online.
- Upload a revised version of the text, including any tables, as a .doc file. Alterations to the text should be highlighted by using track changes in Word. Alternatively, changes can be highlighted in BOLD TYPE. Please ensure that only ONE set of changes is visible.
- Upload an unmarked copy of the manuscript text as a Supporting Document. (If your paper is accepted for publication, an unmarked copy of the document will be required for displaying in the ‘Recently Published’ articles section of the Journal’s homepage.)
- Upload separate print-quality figure files in PDF, TIFF or EPS format. It is essential to follow the instructions described below in Preparation of electronic artwork for publication.
- Upload a short abstract of no more than 60 words and, in a separate file, a small square figure (see Graphical abstracts for more information).
Submission of a manuscript implies: (1) that the work described has not been published before (except in the form of an abstract or as part of a lecture, review or thesis); (2) that it is not under consideration for publication elsewhere; (3) that its publication in the present form has been approved by all authors and by the responsible authorities in the institutions where the work was carried out; and (4) that, if accepted, it will not be published elsewhere in the same form, in any language, without the consent of FEBS, the licence holder. Prior or concurrent submission of the manuscript to an institutional repository or a not-for-profit subject-based preprint server does not constitute prior publication (see Preprints). Previously published abstracts, etc. should be referred to in the Introduction.
Authors are encouraged to include all necessary experimental evidence in the main text of their paper so that it is complete and self-contained (see Supplementary material).
Submission of a research article is taken to imply that the authors are willing to make available to academic researchers any cell lines, DNA clones, antibodies or similar materials that have been used in the experiments reported.
Any conflict of interest must be stated on the title page of the manuscript.
The FEBS Journal endorses the San Francisco Declaration on Research Assessment.
The FEBS Journal supports rapid and open scientific communication. Authors are free to upload their work to their personal website, their company’s/institution’s repository or archive, or a not-for-profit subject-based preprint server or repository ahead of or concurrently with submission to the Journal. Posting a manuscript to a recognised preprint server does not constitute prior publication.
Submitted manuscripts are assigned to a handling Editor who is responsible for its evaluation. The Editor-in-Chief's decision regarding publication is based on the reports of referees and the handling Editor's recommendation, which will, at the Editorin-Chief's discretion, be transmitted to the authors. Authors will be informed of the editorial decision, on average, within 4 weeks of submission of a Regular Paper. The status of your manuscript can be checked via your ‘Author Centre’ at: https://mc.manuscriptcentral.com/febsj/. Enquiries should be addressed to the Editorial Office (firstname.lastname@example.org).
This Journal works together with FEBS Open Bio to enable rapid publication of good-quality research that cannot be accepted for publication by The FEBS Journal. Authors may be offered the option of transferring the paper, along with any related peer reviews, to FEBS Open Bio for consideration by its Editors.
Authors are required to meet the criteria for authorship as recommended by the International Committee of Medical Journal Editors (ICMJE). The specific contributions of each author must be described in an Author Contribution statement.
Authors should consider and follow the ethical standards described below. The processing of a paper may be delayed if there is any doubt about it conforming to these ethical standards.
1. Research Misconduct
Any breach of research or publication ethics including plagiarism, submission of fraudulent results/data including doctored figures, dual publication and false or incomplete attribution of authorship will not be tolerated. It will also be considered malpractice for an author to make inappropriate contact with a referee/Editor during the review process with the aim of influencing the outcome. The FEBS Journal will take action where misconduct is suspected, along the lines of the general principles outlined in Guidelines on Good Publication Practice, produced by the Committee on Publication Ethics (COPE). The Guidelines are available from the COPE website (www.publicationethics.org).
2. Animal Experiments
The FEBS Journal endorses the ARRIVE Guidelines for reporting in vivo animal experiments. Whenever appropriate, authors should include in the Materials and Methods (Experimental Procedures) section:
- A statement indicating that the experiments were performed in accordance with named national legislation, where it exists, or, in its absence, with the named institutional/local body concerned with the ethics of experimentation (e.g. the National Research Council, or NIH in the USA). Experiments should be carried out in accordance with the European Communities Council Directive of 24 November 1986 (86/609/EEC) or with the Guidelines laid down by the NIH in the USA regarding the care and use of animals for experimental procedures.
- A full description of the anaesthetic and surgical procedures used, and of peri-operative care.
- Evidence that authors took adequate steps to ensure that animals did not suffer unnecessarily at any stage of an experiment, whether acute or chronic.
3. Human Experiments
Research involving human subjects should comply with the Code of Ethics of the World Medical Association (Declaration of Helsinki). See: http://www.cirp.org/library/ethics/helsinki/.
If human subjects are used, manuscripts must be accompanied by a statement in the Materials and Methods (Experimental Procedures) section, indicating that:
- The experiments were undertaken with the understanding and written consent of each subject.
- The study methodologies conformed to the standards set by the Declaration of Helsinki.
- The study methodologies were approved by the local ethics committee.
Authors should ensure that all risks are minimised and the subjects are not injured and do not feel they have been abused as a result of participating in the study. Fully informed consent should always be sought.
In cases of experiments involving minors, in addition to meeting above mentioned precautions, evidence must be presented that the experiments were performed with the understanding and consent of the legal guardian.
The Editor reserves the right to reject a paper if there is doubt as to whether appropriate procedures have been used.
Wiley has partnered with Overleaf, a collaborative, cloud-based authoring tool, to offer you Overleaf Link on The FEBS Journal. Overleaf Link is a dedicated article submission template, where you can write and edit your article in Overleaf, and then submit directly to the journal editorial office.
The article submission template is available here.
For more information, please visit our Overleaf Link webpage.
If you are new to Overleaf there are a number of video tutorials available at this link. If you need any help, we have a direct support arrangement with Overleaf. Please contact them at email@example.com or visit www.overleaf.com/contact.
Regular papers are the main form of publication of new research results in The FEBS Journal. There is no formal limitation on length but a regular paper rarely exceeds about 7,500 words (39,000 characters, without spaces). Shorter papers are, of course, welcome and the Editors will make recommendations for shortening any paper if that appears appropriate without loss of essential content. A concise, well-written paper is easier for the Editor and referees to evaluate, which can help to speed up publication.
We have no formal limit on the number of references, again subject to readability, and strongly encourage citation of primary literature, where appropriate, instead of reviews in research articles. It is important to ensure the original authors are given due credit.
The FEBS Journal publishes reviews in all areas of the molecular life sciences. Reviews should appeal to a broad readership, including non-specialists. Ideally, reviews should convey new ideas, rather than simply a collation of information on a topic.
Reviews are commissioned by the Editorial team and are subject to peer review; therefore an invitation to contribute a review does not guarantee acceptance. Authors are encouraged to provide the details of three preferred referees at submission.
To maximise their exposure, all reviews and minireviews are made freely available immediately on publication in The FEBS Journal. Authors of reviews and coordinators of minireviews are also encouraged to record a podcast to accompany their article.
Unsolicited reviews are not considered but, if authors wish to submit a review proposal, they may do so. Pre-submission enquiries about timely contributions can be addressed to Professor Seamus Martin (Editor-in-Chief; firstname.lastname@example.org), and should include a 250-word summary, an overview of the article structure, and a list of key recent references.
Please see key points for authors of reviews above, but note the following specific guidance:
- Main text: this should normally be 3,000–5,000 words.
- References: 50–75 references. If appropriate, please include the other minireviews in the series. The series coordinator will be able to provide authors’ names and titles, and the publisher will insert pagination at proof stage.
- Figures and tables: up to 5 figures and tables can be included.
A State-of-the-Art Review is an invited contribution wherein authors summarise the current state of play in their research area, and highlight where the major unresolved questions lie.
A Discovery-in-Context Review is an invited contribution that aims to convey the context in which a major scientific advance was made.
A Structural Snapshot is an invited contribution that presents a succinct discussion of a particular structure recently published by the authors’ laboratory.
A Viewpoint is an invited contribution that aims to convey new ideas or controversial perspectives on cutting-edge topics.
A Commentary is an invited contribution that discusses and contextualises recently published research.
If your manuscript describes a three-dimensional model of a protein that has been manually built, you should consider depositing it in the PMDB database (see also NAR (2006) 34, 306–309). The database will return a unique identifier that you can include in your manuscript, thereby allowing readers to access your model. The accession number should be included in the manuscript on the first page, in the format: 'Database: model data are available in the PMDB database under the accession number XXXX'. The model can be stored either as a full model with 3D coordinates in PDB format, or as an alignment to a known structure in the CASP format. You may keep your model on hold (i.e. not public) for up to three months after deposition.
Authors of manuscripts describing macromolecular structures must deposit the atomic coordinates and related experimental data (structure factor amplitudes/intensities and/or NMR restraints and chemical shifts) in the RCSB Protein Data Bank.
The PDB ID must be included in the manuscript. Authors must also submit the PDB Summary Validation Report that includes a PDB ID, provided after annotation by the wwPDB, for review at the time of submission. A validation report is not necessary if the coordinates discussed in the manuscript have already been released by the PDB.
Authors must agree to release the atomic coordinates and experimental data when the associated article is published.
Electron microscopy-derived density maps (all averaging methods, including sub-tomogram averaging) must be deposited in EM Data Bank (EMDB). For electron tomographic studies with no averaging, deposition of one or more representative tomograms in EMDB is strongly recommended. In cases where PDB models have been fitted into EMDB maps, the correspondences between them should be clearly stated.
Please include PDB and/or EMDB accession codes in the manuscript on the title page in the following format:
Database: structural data are available in XXX database(s) under the accession number(s) XXX.
If requested by the Editor and/or referees, the authors must make the atomic coordinates and related experimental data (structure factor amplitudes/intensities and/or NMR restraints and chemical shifts) available for review purposes only.
Sequences should be treated as follows:
- Protein sequences, which have been determined by direct sequencing of the protein, must be submitted to UniProt. Please note that accession numbers are not provided in advance for protein sequences that are the result of translation of nucleic acid sequences. These translations will automatically be forwarded from the EMBL nucleotide database and are assigned UniProt accession numbers.
- Results from characterisation experiments should also be submitted to UniProt, including such information as function, subcellular location, subunit composition, etc. See http://www.uniprot.org/update.
- Proteomics data with protein identifications by mass spectrometry should be submitted to the PRIDE database at the EMBL Outstation The European Bioinformatics Institute website.
- Nucleotide sequences of DNA should be determined from both strands. Authors must describe the sequencing strategy used and must justify in their paper why any regions of the sequence have been determined from only one strand.
- Novel nucleotide sequence data (including predicted translations) must be submitted to one of the partner databases of the International Nucleotide Sequence Database Collaboration, the European Nucleotide Archive, GenBank or the DNA Databank of Japan. Submission to any one of the three collaborating databanks is sufficient to ensure data entry in all.
For special styles of submission (e.g. genomes, bulk submissions, etc.), additional submission systems are available from the above sites.
The accession number should be included in the manuscript on the title page in the following format:
Database: nucleotide sequence data are available in the DDBJ/EMBL/GenBank databases under the accession number(s) XXXX.
If requested, the database will withhold release of data until publication.
NB All accession numbers must be obtained before the paper can be accepted for publication.
Functional genomics data, in particular gene expression (microarray or RNAseq), chromatin binding and modification (Chip-seq) and similar must be submitted to ArrayExpress at EBI or Gene Expression Omnibus at NCBI and should be compliant with MIAME or MINSEQE standards.
The accession number should be included in the manuscript on the title page in the following format:
Database: gene expression/chromatin binding/, etc. data are available in the ArrayExpress/GEO databases under the accession number(s) XXXX.
If requested, the database will withhold release of data until publication.
NB All accession numbers must be obtained before the paper can be accepted for publication.
For papers reporting kinetic and thermodynamic data concerning biological catalysts (enzymes, other catalytic proteins and nucleic acids), authors must include the identity of the catalyst, its origin (e.g. species, tissue) and the nature of any post-translational modification. The method of preparation and criteria of purity, assay conditions, methodology, activity and any other information relevant to judging the reproducibility of the results must also be reported. Authors are advised to consult the Beilstein Institut STRENDA Commission website for more details and suggestions.
Enzyme activity (steady-state) should be reported in terms of Vmax (nmol or µmol product formed per amount ((protein)) per time) or, preferably, as kcat (Vmax divided by molar enzyme concentration), in min-1 or s-1. Km units are given in molarity. Values of kcat (Vmax) and Km should be estimated using nonlinear fitting. The software system used in nonlinear fitting should be cited.
Parameters should include estimates of error (e.g. SE). The use of linear transformation for Michaelis−Menten parameters is discouraged. Only in selected cases should linear graphical data be shown (e.g. graphical presentation of inhibition to inform on mechanism).
A lack of activity should be defined in terms of a limit of detection. In a series of comparisons to a basal or ‘control’ level of activity (e.g. set as unity or ‘100%’), this activity should be indicated, in the units mentioned above, along with estimates of error.
The inclusion of examples of some of the raw data is encouraged, at least as part of a Supplemental Data section. Please refer to the STRENDA website regarding enzyme inhibition. Ki values are preferred to IC50.
For the benefit of readers, the online version of a manuscript in The FEBS Journal provides direct hyperlink access to entries in the databases listed below.
Accession numbers referred to within the body text can also be hyperlinked in the online version. Please ensure that accession numbers (IDs) are complete and in an accurate format in bold in the manuscript in the following format: Database ID: XXXX
1. GenBank database
2. European Nucleotide Archive
3. DDBJ database
4. UniProt Protein Database
5. EC database
Where appropriate, authors are requested to include accession numbers for these databases in their manuscripts.
In accordance with our Author Guidelines, authors must deposit all ‘structured’ data sets (e.g. gene sequences, protein structures, microarray data, etc.) in the appropriate public databases and include the accession number in their paper.
However, we recognize that authors might also wish to share the raw data underlying other figures and tables included in their paper. To facilitate data sharing, Wiley have partnered with the figshare repository. Authors wishing to deposit raw data files in figshare should upload them as ‘Data Files’ during the submission process. Data Files will be available to the editors and reviewers, but will not be formally peer reviewed. Upon acceptance of an article, the Data Files will be deposited free of charge to figshare on the author’s behalf, with a CC-0 license (no rights reserved) applied. The data will be assigned a single DOI, which will be added to a Data Accessibility section in the article. The data on figshare will be linked back to the original article in The FEBS Journal.
VERY IMPORANT: Data Files provided to figshare must not duplicate existing figures, tables or movies in the main text or supplementary information. Figshare is intended as a repository ONLY for those data that would otherwise not be included in the manuscript (e.g. raw data underlying graphs, uncropped western blots, etc). Please continue to include as supplementary information any files that are essential to the full understanding of your paper. Please ensure that you retain a local copy of any data posted to figshare.
Authors must not submit data that is sensitive in nature or should not be made publicly available due to privacy, security, and/or safety concerns, such as human subject data or the location of endangered species.
Please use standard fonts (Times, Times New Roman, Arial or Helvetica for general text; Courier or Courier New for sequence alignments; Symbol font for Greek characters and other non-standard characters such as the degree symbol) in your document. Asian-based font sets may produce uncertain results.
Submissions may be subject to testing for textual similarity to other published works via the CrossCheck software employed by the Journal.
Manuscripts must contain the following:
Title. This should be concise but informative. See http://olabout.wiley.com/WileyCDA/Section/id-828012.html for suggestions on how to optimise your title and abstract for search engine discoverability. Avoid abbreviations.
Authors' names. These should appear below the title, with the first or middle name of each author given in full. Given names should appear first.
Addresses. The laboratories where the work was carried out should be given below the authors' names. If the work was carried out at more than one laboratory, the names of the authors should be followed by superscript numbers, which should also precede the names of the appropriate laboratories.
Corresponding author(s). The full name and address of the author for correspondence, including telephone number and email address, should be given. The author should indicate if any of these should not be published. Authors are encouraged to provide the URL of their departmental website for publication.
Running title. This should contain no more than 50 characters (including spaces).
Abbreviations. These should be defined unless included in the table of accepted abbreviations. They should be introduced only if essential owing to frequent repetition or excessive length of the full name. For further details, see the Nomenclature, symbols, units and abbreviations section below.
Enzymes. It is recommended that Enzyme Commission (EC) numbers are given for enzymes; the NC-IUBMB list has a search facility and explains how to submit suggestions for new listings and for updating older entries. Please show all EC numbers in bold type.
Databases. Please provide accession codes for new deposits, if appropriate.
Keywords. Please provide up to 5 keywords for Regular papers and up to 10 for Reviews. These keywords will be printed alongside the summary [abstract??] and are indexed by PubMed.
Conflicts of Interest. Any real or perceived conflicts must be disclosed on the title page.
The abstract should give a concise statement of the problem, the experimental approach, and the major findings and conclusions. The abstract should be carefully worded to reflect search terms on PubMed. It should not contain more than 250 words and should be intelligible without reference to other parts of the paper. References, if cited, should be given in full (without the title of the paper). Abbreviations should be avoided.
The Introduction should provide the necessary context to support the importance of the discovery being reported. A brief summary of the major findings should be provided at the end of the Introduction.
The Results section should describe the experiments performed and results obtained therein. The Results should be subdivided with topical subheadings.
The Discussion can be subdivided with topical subheadings. It is permissible to combine Results and Discussion if a clearer, shorter paper is produced.
It is essential to provide sufficient detail in this section to allow others to reproduce the work. There is no word limit and authors are strongly encouraged to report their experimental approaches in detail.
Authors must ensure that they include all funding grant numbers in the Acknowledgments section of the manuscript.
A short description of the contribution of each author (initials only) should be provided in this section. Authors are required to meet the criteria for authorship as recommended by the International Committee of Medical Journal Editors (ICMJE). Specific categories of contribution include: planned experiments; performed experiments; analysed data; contributed reagents or other essential material; wrote the paper; other.
The FEBS Journal prefers abbreviations and nomenclature to follow internationally agreed recommendations, e.g. those of the Nomenclature Committee of the International Union of Biochemistry and Molecular Biology (see www.chem.qmw.ac.uk/iubmb/nomenclature). However:
- Authors may use commonly used abbreviations/acronyms but these must be defined in the text at first citation and included in the Abbreviations list.
- SI units and quantities should be used (see http://www.bipm.fr/enus/3_SI/si.html) but Å, cal, p.p.m. can be used where appropriate.
- It is often convenient, especially in figures and table headings, to give a multiple of the quantity set or measured by multiplying it by a stated factor. The units in which it is expressed should not be multiplied by a number but may be indicated by prefixes such as: M, k, m, µ, n or p.
- A negative index style is used for units.
- Square brackets are commonly used to indicate concentrations.
The FEBS Journal uses a numbered system for references. References must be cited in the text, starting in the Introduction, by numbers in square brackets, e.g. , in numerical order of their citation in the text. In the reference list, titles must be provided for all serial publications.
All authors should be listed for cited works with ten or fewer authors. If a cited work has more than ten authors, the first ten authors should be listed followed by ‘et al.’. Reference to articles cited as 'in press' should include the title, the name of the journal and the DOI (formatted as a URL). Reference to unpublished work, including papers in preparation, should be kept to a minimum and should be mentioned in parentheses in the text as unpublished work, not in the reference list. The names of all contributors to the work should be given. Personal communications should be mentioned only in the text. Permission must be sought and obtained from the relevant person.
The reference list should appear in numerical order. Examples of the correct styles are shown below:
1. Tsubokawa M, Tohyama Y, Tohyama K, Asahi M, Inazu T, Nakamura H, Saito H & Yamamura H (1997) Interleukin-3 activates Syk in a human myeloblastic leukemia cell line, AML193. Eur J Biochem 249, 792-796.
2. Bouvier LA, Niemirowicz GT, Salas-Sarduy E, Cazzulo JJ and Alvarez VE. (in press) DNA-damage inducible protein 1 is a conserved metacaspase substrate that is cleaved and further destabilized in yeast under specific metabolic conditions. FEBS J. (https://doi.org/10.1111/febs.14390)
3.Tsubokawa M III, Tohyama Y Jr, Tohyama K, Asahi M, Inazu T, Nakamura H, Saito H & Yamamura H (1997) Interleukin-3 activates Syk in a human myeloblastic leukemia cell line, AML193. Eur J Biochem 249, 792–796.
4. Rojo AI, Pajares M, Rada P, Nunez A, Nevado-Holgado AJ, Killik R, Van Leuven F, Ribe E, Lovestone S, Yamamoto M et al. (2017) NRF2 deficiency replicates transcriptomic changes in Alzheimer’s patients and worsens APP and TAU pathology. Redox Biol 13, 444–451.
5. Sambrook J, Fritsch EF & Maniatis T (1989) Molecular Cloning: A Laboratory Manual, 2nd edn. Cold Spring Harbor Laboratory Press, Cold Spring Harbor, NY.
6.Langer T & Neupert W (1994) Chaperoning mitochondrial biogenesis. In The Biology of Heat Shock Proteins and Molecular Chaperones (Morimoto RI, Tissières A & Georgopoulos C, eds), pp. 53–83. Cold Spring Harbor Laboratory Press, Plainview, NY.
7. Smith A (2000) The role of potassium channels in lymphocytes. PhD Thesis, University of Bristol, UK.
8. Rep M, van Dijl JM, Suda K, Schatz G, Grivell LA & Suzuki CK (1996) Promotion of mitochondrial membrane complex assembly by a proteolytically inactive yeast Lon. Science 274, 103–106 (erratum appears in Science 275, 741).
9. Yous S, Depreux P, Adam G, Caignard DH, Lesieur D, Guardiola B & Renard P (1993) European Patent Application No. EP0562956.
These must be supplied as editable text and not as embedded figures/objects. They should have a bold title and appear in the text following the references. Experimental conditions and general remarks should appear in a legend between the title and the table. They should not reproduce the detail given in Materials and Methods. Footnotes should be used only if information cannot be included in the legend; they should be indicated by superscript lower-case letters. All columns should have a heading; units should appear under the column heading(s).
Schema should appear in the text following the references. Authors should not use Microsoft Word 2007 equation tool to supply equations/schema. Instead, authors should use the Mathtype plug-in, an equation editor for Word that is freely available to download.
Figure legends should appear in the text document following the references, each with a title, and be comprehensible without reference to the text. The figure title must be relevant to the entire figure. Supplementary figure legends should be included in the actual supplementary figure files (see Supplementary material).
If applicable, error bars should be defined as s.d. or s.e.m. and a precise n value given. Where statistical tests have been used to calculate significance (or lack thereof) the p value should be defined and the name of the statistical test provided in the relevant legend.
Images should not be modified to change their appearance or enhance any specific feature. Any adjustments of brightness and contrast or colour balance must be applied to the entire image and should not result in loss or gain of information. Unacceptable modifications include the addition, alteration or removal of a particular feature of an image. All figures in manuscripts will be examined for any indication of improper modification, duplication or any other alteration that could affect interpretation of the data. The final acceptance of all manuscripts is contingent upon any concerns relating to the composition of figures being fully resolved.
Molecular mass markers should be included alongside blots, and scale bars must be included in micrographs.
Authors should have their original figures available for review by the Editor or referees, if requested.
Colour figures are published free of charge in the Journal. Authors are strongly encouraged to include colour in all figures, including histograms, line graphs, schematics as well as photomicrographs, in order to enhance the quality of data presentation for our readers. In the interest of readers with colour blindness, red-green and blue-yellow colour combinations should be avoided.
Reproduction of a previously published figure should be acknowledged at the end of the figure legend as follows: 'Figure reproduced from [ref. number]'. References to the source should be included in the reference list.
For each reproduced figure, it is the authors’ responsibility to check with the relevant publisher whether permission for reproduction is required. Authors should inform the Editorial Office (email@example.com) when permission is required for a figure. Permission must be obtained before publication and emailed to the Editorial Office.
All data that are essential to the interpretation of the paper should be included within the main text of the paper so that it is complete and self-contained.
Supplementary material is limited to:
- 3D structures/images [these may be included in the main text, if desired]
- large datasets
- lists of primers, plasmids and strains
- 'raw' data (e.g. kinetic stopped flow transients; tables of kinetic data; mass spectrometry mzdata; outputs and analyses from complex data fitting routines, or similar types of output)
Any supplementary material that conforms to the above criteria must be included with the original submission and will be subject to peer review. After acceptance, supplementary material will be published online exactly as submitted by the authors (i.e. it will not be copyedited and will not be available for checking and editing at proof stage). Thus, any material that is deemed appropriate for publication as supplementary material must be correctly supplied, labelled and cited, as follows:
- All supplementary items should be cited within the main text using the correct abbreviated form (see below).
- The full titles of all supplementary items must be listed in a 'Supporting Information' section after the references. This will provide readers with a 'table of contents' of the Supporting Information zip file accompanying your published articles.
- The full titles and, where appropriate, legends of supplementary data, movies, text, figures and tables should be included above or below each respective supplementary file.
- All supplementary material must be included within a single .pdf file (excluding movies).
Example supplementary item
Table (e.g. list of primers, plasmids, strains)
Table S1: Full title of table
Table S1, Table S2, etc.
Figure (e.g. 3D structures)
Figure S1: Full title of figure
Fig. S1, Fig. S2, etc.
Movie (e.g. video clips, animations)
Movie S1: Full title of movie
Movie S1, Movie S2, etc.
Preparation of electronic artwork for publication
Low-quality images are generally acceptable for review purposes. However, for online and print-on-demand publication, high-quality images are required to prevent the final product being blurred or pixelated. Information on the appropriate file formats for electronic graphics is available at http://authorservices.wiley.com/bauthor/illustration.asp.
To facilitate production of publication-quality artwork, we recommend that authors generate their artwork in software packages incorporating the ability to ‘Save as…’ or ‘Export…’ as TIFF/EPS files, e.g. Adobe Illustrator 7.0 and above (EPS), Adobe Illustrator 9.0 (EPS but can also export files as TIFF), Deneba Canvas 6.0 and above (EPS), CorelDRAW 7.0 and above (EPS), Adobe Photoshop 4.0 and above (TIFF). Authors can export low-resolution figs (GIF/JPG) from these packages for review purposes. EPS files can be produced from other applications (e.g. PowerPoint) BUT results can be unpredictable (e.g. fonts and shading not converted correctly, lines missing, dotted lines becoming solid). All scanned images embedded into other applications should be scanned at the recommended resolutions (see below).
- Supply figures at final size widths: 80 mm (single column); 165 mm (double column) or 105 mm (intermediate). Maximum depth is 230 mm. Larger figures will be reduced as appropriate, so please ensure that any line widths and lettering are in proportion to the size of the figure. Figures saved as .tiff, or containing embedded .tiffs, will not be enlarged, as this leads to loss of resolution.
- Use sans serif, true-type fonts for labels if possible (preferably Arial or Helvetica), and Times (New) Roman if serif fonts required. Use Courier or Courier New for sequence data.
- Line drawing lettering/lines must be clear. The axes of each graph should be lettered with the numerical scale and the measured quantity with units.
- Halftones (photographs) must have scale bars where applicable.
- Multipart figures should be supplied in the final layout in one file, with each part labelled.
File format and resolution guidelines
- Submit TIFF, EPS or PDF files only.
- Save line art such as charts, graphs and illustrations in EPS or PDF format. Most programs have a ‘Save as…’ or ‘Export…’ feature to allow you to do this.
- Save photographic images in TIFF format. These should be saved at final publication size and should have a resolution of at least 300 dpi (dots per inch) at final size.
- Save figures containing a combination of photographic images and text (e.g. annotated photographic images with text labels) as EPS or PDF. Any photographic images embedded within these should be at least 300 dpi.
- EPS files should be saved with fonts embedded (and with a TIFF preview if possible).
- When creating PDF files, it is essential that Press Quality settings (with a resolution of 300 dpi) are used in your PDF-generating software.
- For scanned images, the scanning resolution (at final image size, see above for a guide to sizes) should be 300 dpi to ensure adequate reproduction.
- TIFF files can be very large; use LZW compression if possible, as this can greatly reduce the file size. For all TIFF files, it is important not to exceed the resolutions stated. Doing so will not improve the quality of output of your figure, but may produce impractically large files.
- Perform a visual check of the quality of the generated image. You should be able to zoom in to about 300% without the image becoming noticeably blurred or pixelated. If the image does appear pixelated at this zoom, go back to the original image and check that it complies with the recommended format and settings.
- Black and white images should be supplied as 'grayscale'.
- Colour images should be supplied as RGB.
Authors with a colour figure appearing in an accepted paper that they believe would make a good image for the Journal cover are invited to submit a copy of the figure, 21 cm (width) by 16 cm (height), in colour, without any labels or scale bars. Please supply an electronic copy of the figure, with a short legend (max. 15 words), following instructions in the Preparation of electronic artwork for publication section.
The Journal publishes graphical abstracts in its online table of contents and content alert emails. This is an opportunity to create not just a concise text summary but also a clear visual representation of your article's main message to attract potential readers (remember: 'a picture is worth a thousand words'). Ideally, graphical abstract files should be colour images containing one or two graphical elements and should be visually attractive and contain minimal text. The main objective of a graphical abstract file is to capture the main message or topic of your paper, at a glance, drawing the reader towards the article. For examples, see a sample issue at
Please provide as two separate Supporting Documents:
- A short abstract of up to 60 words as a Word document named 'GraphicalAbstract_text.doc', which is easy to understand by a general readership.
- An image file as a TIFF or PDF named 'GraphicalAbstract_figure'. This should be a newly created colour image that simply and clearly emphasises the main finding(s) of your article (please do not simply re-use a figure from your article). Please make sure the image (1) is square, measuring 5.5 inches x 5.5 inches (140 mm x 140 mm), and has a resolution of 300 dpi; (2) does not include too much text and that any labels are clear and simple; (3) uses Arial font 12 to 16 (so that text is easy to read, especially on mobile devices); (4) consists of a single panel of elements that progress clearly from top to bottom, or left to right (to aid understanding).
The FEBS Journal can receive submissions in LaTeX. Please use ‘article’ class for LaTeX submissions and include any associated packages/files with the submitted LaTeX source files. Please also include a PDF of the manuscript. Do not add coding to ‘force’ line breaks or the positioning of ‘floats’, as these will need to be removed in the processing of your manuscript.
If you wish to use a citation package such as BibTeX and natbib.sty, then please do so. There is no bespoke ‘.bst’ file for The FEBS Journal. Please provide all the necessary bibliographic information in a standard format. This will allow for clearer conversion and formatting to the The FEBS Journal style by the typesetters. As articles undergo considerable conversion and transformation during production, we achieve the most efficient processing if articles are presented in as generic a form as possible.
Authors for whom English is a second language may choose to have their manuscript professionally edited before submission to improve the English. One potential such option is Wiley Editing Services, available here. All services are to be arranged and paid for by the author, and use of one of these services does not guarantee acceptance or preference for publication.
Articles in the Journal that have been peer reviewed and accepted, but not yet copy-edited, are published online through our Accepted Articles feature. This service has been designed to ensure the circulation of research papers immediately after acceptance, and as such papers published here will not be checked or corrected in any way. Readers should note that articles published within Accepted Articles have been fully refereed, but have not been through the copy-editing and proof correction process, or amended to Journal style. Graphics are placed at the end of the PDF and may be compressed to reduce PDF download time.
Once the manuscript has been through the production process (~30 days from formal acceptance), the article is removed from the Accepted Articles area and published in the Recently Published section of the Journal homepage.
The FEBS Journal Reviews and Minireviews are freely available from the Journal website immediately on publication. Research papers are freely available after a 12-month period.
After publication, authors will retain the right to self-archive the peer-reviewed (but not final) version of the paper submitted to The FEBS Journal on their personal website, in their company/institutional repository or archive, and in certain not for profit subject-based repositories such as PubMed Central (as listed at the following website http://olabout.wiley.com/WileyCDA/Section/id-820227.html), subject to an embargo period of 12 months following publication of the final version.
The version posted must include a legend to make clear that 'This is the accepted version of the following article: FULL CITE, which has been published in final form at [Link to final article]'. Please note that authors may not update the accepted version or replace it with the published version. Please also see the section on Copyright and OnlineOpen below.
Once a paper is accepted, the corresponding author for the paper will receive an email prompting him/her to log into Author Services where, via the Wiley Author Licensing Service (WALS), they will be able to complete the licence agreement on behalf of all authors on the paper. The corresponding author may opt to either sign the copyright transfer agreement or publish the article with open access via OnlineOpen.
For authors choosing OnlineOpen
OnlineOpen is available to authors who wish to make their article immediately available via open access and accessible to all on Wiley Online Library, including those who don’t subscribe to the Journal. Wiley will also submit the published article in PubMed Central and PMC mirror sites. The charge for this OnlineOpen service is US$3800.
If the OnlineOpen option is selected, the corresponding author will have a choice of the following Creative Commons Licence Open Access Agreements (OAA):
· Creative Commons Attribution Licence OAA (CC-BY)
· Creative Commons Attribution Non-Commercial Licence OAA (CC-BY-NC)
· Creative Commons Attribution Non-Commercial -NoDerivs Licecse OAA (CC-BY-NC-ND)
To preview the terms and conditions of these open access agreements, please see the Copyright FAQs hosted on Wiley Author Services or visit http://www.wileyopenaccess.com/details/content/12f25db4c87/copyright--licence.html
All Research Councils UK (RCUK), COAF/Wellcome Trust and FWF-funded authors will be directed to the Creative Commons Attribution licence (CC-BY) for compliance with the funding agencies’ mandates. For more information on this policy and the Journal’s self-archiving policy, please visit http://www.wiley.com/go/funderstatement
For authors signing the copyright transfer agreement
If the OnlineOpen option is not selected, the corresponding author will be presented with the copyright transfer agreement (CTA) to sign. The terms and conditions of the CTA can be previewed in the samples associated with the Copyright FAQs below:
CTA Terms and Conditions http://exchanges.wiley.com/authors/copyright-and-permissions_333.html
From April 2008, the NIH has mandated grantees to deposit their peer-reviewed author manuscripts in PubMed Central, to be made publicly available within 12 months of publication. The NIH mandate applies to all articles that are based on research that has been wholly or partially funded by the NIH, and that are accepted for publication on or after April 7, 2008. If the authors acknowledge NIH funding in the manuscript and give the grant number, then the paper will be automatically handled by Wiley to meet the terms of the NIH mandate.
To help authors comply with the NIH mandate, Wiley will post accepted manuscripts of NIH grant-holders (incorporating all amendments made during peer review, but before the Publisher’s copy-editing and typesetting) to PubMed Central at the point of acceptance by the Journal. This version will then be made publicly available in PubMed Central 12 months after publication. Following the deposit, authors will receive further communications from the NIH with respect to the submission. See further information here.
RCUK, Wellcome, COAF, FWF, Telethon Italy, ARC and NHMRC, HHMI and USDOE grantees can find further information here.
Authors or a third party wishing to reproduce figures, tables or brief quotations from the text of articles published in The FEBS Journal for non-commercial purposes may do so, providing the original publication is acknowledged accordingly and the approval of all the authors is obtained. No special permission is needed from either FEBS or the Publisher, Wiley, for this. If authors or a third party wish to use a major part of an article or an entire article elsewhere, whether in English or in any translation, permission must be asked from the Publisher, who will contact FEBS, the licence holder, if necessary.
Papers accepted for publication in The FEBS Journal will be available in the Recently Published section of the Journal website as soon as they are ready for publication. This can occur weeks in advance of the cover date of the printed issue. Authors should take this into account when planning their intellectual and patent activities related to a document.
Online production tracking is available for your article through Wiley Author Services. Author Services enables authors to track their article − once it has been accepted − through the production process to publication online and in print. Authors can check the status of their articles online and choose to receive automated emails at key stages of production.
Visit Wiley Author Services for more details on online production tracking and for a wealth of resources including FAQs and tips on article preparation, submission and more.
Please note that unless specifically requested otherwise, Wiley will dispose of all submitted hardcopy or electronic material two issues after publication. If you require the return of any material submitted, please inform the Editorial Office or Production Editor as soon as possible.
Free access to the final PDF offprint or your article is available via Wiley Author Services only.
- State-of-the-Art Reviews
- Discovery-in-Context Reviews
- Structural Snapshots
- All Free Review Content
- Editor's Choice
- Minireview Series
- Special Issues
- Virtual Issues
- Press Releases from The FEBS Journal
- The FEBS Journal Richard Perham Prize
- The FEBS Journal Talk and Poster Prizes
- FEBS Congress abstracts
- Congratulations to Antoinette Fong, Diego Estrada-Rivadeneyra and V Mitheera for winning our 50th Anniversary Science Communication Competition! Take a look at their entertaining, educational entries.
- Our Special Issue on Malaria is out!
Check out these excellent reviews and primary research articles covering the latest advances in malaria research
- Our Special Issue on Proteases and Proteolysis in Health and Disease is out! Check out these excellent reviews that cover a broad range of topics in this field
- The winner of the 2017 Richard Perham Prize has been announced - congratulations to Sebastian Bittner of University Hospital of Regensburg, Germany! Read his winning paper.
- Check out our Special Issue on CRISPR/Cas9 Gene Editing!
Nine free reviews cover topics from the initial discovery of CRISPR in bacteria to designing guide RNAs...
- The FEBS Journal Special Issue on Cell Death Control is out!
The thirteen specially commissioned reviews from experts in the field cover a broad spectrum of topics.